Your cart is empty.

Firgelli Robots 5.8G Signal Amplifier

5.8G Signal Amplifier


5.8G Signal Amplifier


This compact signal booster kit is used to increase the radio range up to 1000 meters. It can be installed with a unit of wireless controller to manipulate a flying object or robotic chassis. It comes with a 12 Volt AC-DC power adaptor. However, hobbyists can get power using a battery pack according to the power requirement. It is recommended to combine with a voltage stabilizer.


* Frequency bandwidth: 5.15-5.85 GHz
* Operating Mode: Bi-Directional, TDD
* Transmit Gain: 15-18 dB
* Rx Gain: 11-14dB
* Frequency Response: +/- 1dB
* Output Power: 2000mW
* TX Input Power: 1 mW (0dBm) min up to 100mW (20dBm) max
* Receiver Gain: 12 dB Typical
* Noise Figure: 3.5 dB Typical
* LED Indicators: GREEN: Solid On: Power and Receiving mode/Off: No Power
* BLUE: Blinking: Transmitting
* Connectors: Input: RP-SMA (F), Output: RP-SMA(M) 50 Ohm
* Lightning Protection: Direct DC Ground at antenna
* DC Surge Protection: 12V1A
* Operating Temperature: -40°C to + 70°C

Booster Weight:  110g
Package Weight:  350g
Booster Size:  7 *4 * 2 cm
Package Size:  21*13.5*5cm

2.2 lb

Copyright © 2024, Firgelli Robots. Powered by Shopify.