Your cart is empty.

Firgelli Robots Joystick Shield- V2

Joystick Shield- V2


Joystick Shield- V2


The Joystick Shield contains all the parts you need to enable a joystick with your Arduino!  The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers. Soldering is required, but it's relatively easy and requires minimal tools. We even have a step by step guide!

The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.

This product is supplied as a kit with the following items:

* 1x Joystick Shield PCB
* 4x Momentary Push Button Switch - 12mm Square
* 1x Thumb Joystick
* 1x Mini Push Button Switch (breaks out Arduino's reset switch)
* 2x 6-pin Arduino Stackable Header
* 2x 8-pin Arduino Stackable Header

1.0 lb

Copyright © 2024, Firgelli Robots. Powered by Shopify.