Firgelli Automation TV Lift Kits Linear Slides Firgelli Forum
1

Your cart is empty.

Firgelli Robots VCNL4000 Proximity/Light Sensor Breakout

VCNL4000 Proximity/Light Sensor Breakout

$27.65

VCNL4000 Proximity/Light Sensor Breakout

Description:

The VCNL4000 sensor is a nice way to add a small-distance proximity sensor to your microcontroller project. For longer distances (in the range of cm) you can use a SHARP IR distance sensor, but those are only good if the object is over 10 cm away. The VCNL4000 is designed for much shorter distances, no more than 200mm (about 7.5") and in our experimentation we found it worked best at distances of about 10-150mm. It would be good for say detecting when a hand moved nearby, or before a robot smacks into a wall. The sensor also has an ambient light sensor built in.

This sensor is easy to use with any microcontroller that has i2c capability. It is 5 volt compliant so you can use it with 3.3V or 5V logic with no risk of damage. There is an on-board 3.3V ultra low dropout regulator so you can power it with 3.3 to 5.0V. However, if you can give it 5.0V that is ideal since the VIN voltage powers the IR LED and the higher the voltage you can give it, the more powerful it is.

Technical Detail:

* PCB dimensions: 23mm x 23mm (0.9" x 0.9")
* Thickness including tallest SMT components: ~3.15mm (0.125")
* Thickness of PCB: 1.75mm / 0.070"
* This board/chip uses I2C 7-bit address 0x13

Click to View VCNL4000 Datasheet

Click to View VCNL4000 App Note

Click to View VCNL4000 Product Sheet

 

 





Copyright © 2020, Firgelli Robots. Powered by Shopify.